917 Bacon St, Erie, PA 16511
(814) 838-9638

The Blue Diamond Series – Blue Diamond Melters & Holders

Blue Diamond Melters & Holders

Welcome back to Onex’s blog series on our Blue Diamond Industrial Furnaces. If you have been keeping up with this blog, then you already know that Onex is recognized in the industry for a wide range of services, from refractory to combustion services to precast shapes. As part of our 40 years in this industry we’re also known as an OEM designing, building, and servicing all installing our own line of high quality industrial furnaces.

Part of Onex’s mission is to actively share industry knowledge and experience. In this multi-part series, we will continue to look at our Blue Diamond line as well as offer tips for your business on the growing trends in today’s manufacturing marketplace. 

Blue Diamond 1500# & 2000# Aluminum Tilter/Melter & Holder

Today, we are focusing on a valuable piece of equipment for aluminum and zinc processing; one often overshadowed by larger furnaces and equipment. Sure, an industrial reverb furnace is an impressive sight to see, but what about the smaller, yet still necessary holder furnaces? Should these smaller guys hold the same significance on your shop floor?

Why the interest in aluminum?

An Demand for a light, strong, corrosion-resistant, and recyclable materials have given rise to a broader use of aluminum in modern manufacturing. The market for die cast aluminum parts in 2018 registered at a value of USD 24.91 billion, with an expected Compound Annual Growth Rate (CAGR) of a 10.1 % increase from 2019 to 2025. The two primary industries employing aluminum parts are automobile and aerospace, with the transportation sector as a whole accounting for 61.5% of revenue share in 2018 as fuel costs and environmental concerns spur  automotive and airplane manufacturers to design and build more lightweight energy-efficient vehicles.

In addition to transportation,, we see more and more electronic companies replacing steel and plastic parts with aluminum components due to it’s non-conductivity, strength and corrosion resistance. The CAGR for consumer durable goods such as electronics is projected to rise almost 11% from today through 2025.

There are other incentives for using Aluminum. It can be easily recycled and repurposed and does not lose value.  Aluminum retains it’s strength and properties even after many melts; once impurities are removed, aluminum can be used again indefinitely. Since it is 100% recyclable, reused aluminum has an extremely low carbon footprint and is an lower cost and ideal alternative to new aluminum, which has a costly extraction process. 

Given all these trends and facts, Aluminum and zinc are expected to be the materials of choice for manufacturing for many years. As foundries, die casters, and manufacturers respond to market demand, they will need well-made dependable equipment for their operations.       

Onex’s Blue Diamond Line

Onex works with a wide range of industries, but aluminum takes the top spot on our list. Our 40 years of knowledge paired with advanced technology enables us to custom design and build top performing melters, holders and melter/tilters for the non-ferrous industries. Our equipment and services enable ourour customers to be more competitive in the growing aluminum marketplace. The Blue Diamond Aluminum Tilter/Melter and Holders improveg operation performance, and increase your production capabilities. 

A few key facts:

  • The Blue Diamond Tilter/Melter allows for a fast melt rate with 1500# and 2000#’s tapped every 90 minutes. 
  • The melting capabilities are conveniently located to production cells, which allows for an efficient production process. 
  • You can charge, melt, and tap within 90 minutes and reduce energy costs by reducing the amount of time spent holding molten metal.
  • The Aluminum Titler/Melter increases your product offerings to your customers by offering smaller batch jobs and allowing you to change grades as needed. It will also increase metal output due to the quick turnaround of charging, melting and tapping the metal every 90 minutes.

Remember, Onex offers a full range of Furnace support services, including installation, new furnace start-up training and supervision, repairs, combustion services, and material procurement.

To Learn More About Onex Box Furnaces and our other services, please visit our website at www.onexinc.com.

Also, stay posted for more installments in our Blue Diamond Furnace series.

Related Posts